Description
- High modules conversion efficiency 10W Mono-crystalline Solar panel provides up to 10W power, ACOPOWER 10 watt photovoltaic pv Solar panel module 12V Battery charging.
- Delivered ready for connection & FAST and easy installation with pre-drilled hole. Each Solar panel comes with long 90cm cable quick Connectors.
- Basic component for off-grid Solar panel12/24V/36/48V system, Caravan, RVs, cars, boats, Green house Solar system, Solar light, Solar pump etc.
- Withstand high wind (2400PA) and snow loads (5400PA); lightweight anodized aluminum frame and reinforced safety and anti-reflection coated glass 3. 2mm thick and waterproof display-65 rated junction box which allows the panels last for a long time.
- 5 years workshop and 20 years output . If You Have Any Quality Problems Please Contact us.
denis vachon –
tres bien
marie54 –
My order came very fast and we installed it on our sailboat to charge the battery. Amazingly it was easy to install and it started to charge right away.
Robert Critchley –
As mentioned on site. Well packaged.
D.R. Walker –
works like charm great quality for the money
Faith –
Four, 200-Watt panels arrived packaged well. I tested the panels in FLAT mounting and ANGLED mounting configurations to see what I could expect from them. Flat Mounted: I managed to get just over 125-watts of power from each unit which is roughly the same I should expect from a less than perfect mounting angle. (Taking into account a 22% loss for flat mounting and the additional percentage of power I lose from the latitude my residence is located at. (Northern California). The panels were tested at a prescribed angle for my latitude (for direct sunlight) and produced close to 175-watts. These appear to be as good as more expensive, name-brand, 200-watt panels I also own. These are nice quality panels at a good price point. I am happy with the purchase. Would purchase again if they become available in the future.
Retief-CDT –
After having 4 shipments of a 200w panel from another company each broken by Fedex ground it was a pure pleasure to get this one in good condition shipped by USPS. The only problem was at first they would not deliver it because of being “too large for mailbox” but after some fumbles and a long weekend, plus driving 25 miles to the post office only to find out they ignored my coming to pick it up message, it was delivered today intact.
Testing in sun the voltage (21.1vDC) and amperage (9.3a) is at spec and I see only a minor dent on the aluminum frame. All in all I am very pleased.
Amazon however might look into the issue of if these panels are too large for the USPS to routinely deliver. Us rural folks are not close enough to Post Offices for easy pickup.
Daijoubu –
Mais pas encore installé
michael k –
I have used this panel for about a year, has stood up to the elements well. Nice size and easy to handle, installation was easy.
Honest Abe –
Puts out just about the current specified. Looks well made. Should work for my solar fence-charger project just fine.
Christophe –
This 10W panel does indeed produce 10 Watts in full sun.
Produces about 200mA in weak morning sun.
Wires are a bit short. No mounting bracket is included.
There is a blocking diode installed inside the small black cover.
Works well with my small charge controller.
Good value at $18.
-Chris
Scot S. –
ACOPOWER 12V 200W Mono Solar Panel
I live at 42 degrees north, so the sun is not as strong as it could be for some farther south. But one day in July at 10:30AM, it was putting 150 watts into the Buletti EB3A portable power station. Bluetti was already at 50% charge. So the solar panel charged it up fully in less than an hour and a half. Can’t comment about lifespan, but I am happy with its performance on a summer day.
Daijoubu –
Working great, will report back next season on its condition after leaving it outdoor.
Was able to get 1.2A of charge current into a 18650 at Vmpp 17.5V at the input.
When shaded, it dropped to 100-120mA, still very usable.
Jason Land –
I had an old 50W solar panel from the mid-80’s on top of the RV I just bought and it had degraded to the point of just putting out less than 5W in full sunlight. I replaced it with this panel, ran new wires through a new controller, and used 3M 4950 VHB tape with Renogy mounting brackets to mount in a better place on the roof. This panel already has pre-drilled mounting holes, so I just had to install the brackets and stick it to the roof. (NOTE – You also have to install the connector of your choice on – I used the MC4 connectors that come with the panel). In full sunlight this 30W panel puts out a consistent 25W, and will keep my house battery fully charged. The only reason for 4 stars is the panel drops to 3W in the tiniest bit of shade… (IE – shade one corner of the panel).