Description

Complete Off Grid Solar Kit – 1,000 Watts Solar 4KW 12VDC 120/240 Output  | [OGK-6]  
Looking for a solar kit that doesn’t cost an arm and a leg just to get installed? Tired of getting outrageous quotes from solar installation companies? Look no further. Our complete off-grid solar kit comes with all of the parts and pieces needed to get up and running with clean, quiet, off-grid solar power. 
Although we do recommend having a certified solar installer / master electrician install our off-grid kits, these are meant to be extremely simple to setup and we include a professional wiring diagram / schematic for you to follow – meaning there’s no guessing to how it’s supposed to be setup. 
You might be wondering – is this really all I need? Especially considering some of the prices we’ve heard our customers getting from other solar installation companies. But the answer is yes. This is a complete off-grid solar power system that includes all of the parts and pieces you’ll need. 
What Can This Kit Actually Power? 
OGK-6 has 4 x 200ah AGM batteries giving you 400ah of useable battery capacity. This equates to rough 4.8kWh of useable battery bank on top of the 1,000 watts of solar panels that will be generating an additional 1kw of power per hour while the sun is shining. 
If we assume there’s roughly 6 good sun hours in most states, the solar panels will produce around 6kw of power each day (or 180kw/month).
We really only need 15-18 hours of battery bank storage in order to get us through the night and to when the sun comes back up the next day, so anything over and above this would be considered backup for cloudy days.
OGK-6 is perfect for small off-grid cabins, home backup, or as a mid size RV system / mobile business applications.
What’s Included With Your Off-Grid Solar Kit [OGK-6] Order?
1 x 4,000 watt pure sine inverter charger 120 & 240 VAC
5 x 200 watt solar panels
1 x DC1600V32A2I0 – disconnect switch
1 x SCC60MPPT – 80 amp MPPT solar charge controller
4 x AGM12V200A – 200ah AGM deep cycle battery
1 x PVF100FT10AWG – 100 foot PV wire for solar panel to disconnect switch (female)
1 x PVM100FT10AWG – 100 foot PV wire for solar panel to disconnect switch (male)
1 x PVF20FT10AWG – male and female to bare ends for disconnect switch to charge controller
1 x PICGLFBATS – Battery temperature sensor
1 x CBL08FT6AWGC- 8 ft set of 6 AWG cable to connect charge controller to battery bank
1 x ANL80KITJ – 80 amp fuse kit for charge controller to battery bank
1 x CBL08FT4/0 – 8 ft set of 4/0 AWG cable set battery bank to inverter
3 x CBL02FT4/0 – 2 ft set of 4/0 cable (battery cables)
1 x ANL500KITWJUMP – 500 amp inline fuse kit with jumper for batteries to inverter
FREE Shipping
Custom Wiring Schematic / Installation Manual
Lifetime Customer Support (via Phone, Email & Live Chat)
*Our kits include just about everything you need however you’ll need your own installation tools and grounding rods. We highly recommend getting professional installation by a certified solar installer and/or master electrician. 
*EVERYTHING You Need For Setup & Install   Order Yours Today!*
What comes with this kit?
With 1,000 Watts of Solar and a 4000 Watt inverter charger you’ll have 120 & 240 Vac power. Combined 800 amps of battery power and 60 amp charger controller this kit is ideal for large size devices such as appliances, fans, pumps, compressors, electronics up to 33.3 amps.
Perfect for locations that need power for 2-3 hours running 4000 watts, before recharging and also have access to a generator or shore power if available to recharge batteries using the inverter. Solar panels keep a charge on the batteries using sunlight and will recharge the batteries at 50% depletion in 88% (Peak) Line Mode Efficiency: >95%
Output Frequency: 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: < 10% DC
Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)
Input Specifications
Nominal Input Voltage: 12.0Vdc
Minimum Start Voltage: 10.0Vdc
Low Battery Alarm: 10.5Vdc-11.0Vdc
Low battery Trip: 10.0Vdc-10.5Vdc
High Voltage Alarm: 16.0Vdc Low battery
Voltage Restart: 15.5Vdc
Idle Consumption: 50 Watts
Power Saver Mode Idle Consumption: 21 Watts
Charger Specifications
Output voltage: Depends on battery Type
Charger Rate: 115A Over
Charge Protection Shutdown 15.7V
Selectable Charge setting based on battery type
Adjustable charge current off-20%-100%
Four Stage Smart Charger 
Transfer Switch Specifications 40 amp automatic transfer switch 10 ms (max)
Dimensions
Unit weight: 75 lb
Unit size: L x W x H: 31.5 x 8.75 x 7.25 inches
Shipping weight: 87 lb
Shipping size: L x W x H: 35.5 x 14.50 x 13.50 inches
Shipping Weight: 75 lbs. Shipping L x W x H 30.5 x 14.5 x 13.75 inches
[Solar Panels] 5 x 200 Watt Solar Panel Specs:
Maximum Power(Pmax): 200W
Maximum Power Voltage(Vmp): 20.4V
Maximum Power Current(Imp): 9.80A
Open Circuit Voltage(Voc): 24.3V
Short Circuit Current(Isc): 10.2A
Weight: 26.5 lbs
Dimensions: 58.7 x 26.8 x 1.4 in
Warranty: 25 years output warranty
[Charge Controller] 80A MPPT Features:
MPPT technology: Maximum Power Point Tracking produces maximum available power from PV array to battery bank utilizing peak power of the I-V curve
Quality heatsink cooling – no fans needed and no thermal derating
Battery type selector and user defined charging voltage
4 stage charging
PV input, battery output and load control ports
Stackable
Reliable electronics, over engineered components generating less heat
Very efficient up to 99%
Low self consumption
Thermal design rugged case
Over temp protection
Overload, short circuit, high and low voltage protection
RS485 port for computer monitoring
CE, ETL to UL1741 and RoHS compliant
Marine coated
Mounting holes
MPPT ELECTRICAL SPECS:PV Operating Voltage:
15-150Vdc@12V
34-150Vdc@24V
50-150Vdc@36V
60-150Vdc@48V
Rated PV input:
12V – 1200 Watts
24V – 2400 watts
36V – 3600 watts
48V – 4800 watts
Maximum charging current: 80 amps
Maximum DC load current: 60 amps
Max PV open circuit voltage: 150Vdc
Self power consumption: <4 watts
Efficiency: 98.5%
Protections: overload, short circuit, high voltage, high temperature, low voltage and auto correct
Monitoring: RS485 port for computer monitoring
Optimal cooling case design – built for extreme conditions
CHARGING
Battery types: gel, sealed, AGM, flooded, lithium, user defined (adjustable voltage)
4 Stage charging: bulk, absorption, float and equalize
Bulk charge voltage: sealed 14.4V, AGM/gel 14.2V, flooded 14.6V, user defined 10-15V
Float charge voltage:  sealed/AGM/gel 13.7V, flooded 13.6V, user defined 10-15V
Equalize charge voltage: sealed 14.6V, AGM/gel 14.8V, flooded 14.8V, user defined 10-15V
Low voltage reconnection: 12.5V
Low voltage disconnect voltage: 10.5V (10.5-12.5V adjustable)
MECHANICAL
Enclosure: IP43 protection, metal
Cooling: heatsink
Humidity: 100% non-condensing
Temperature compensation: -5mV⁰C / 2V with BTS
Temperature range: -25⁰C to 60⁰C or -13⁰F to 140⁰F
Conformal coated for marine environments
Wire knockouts: 1.25”
Unit weight: 19 lbs
Boxed weight: 21 lbs
Dimensions: 14”L x 9”W x 4.7”H
Warranty: 2 years
Certifications: ETL to UL1741, CE, RoHS, CETL
[Batteries]: 4 x 200Ah AGM Deep Cycle Batteries
Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding. Not restricted for air transport complies with IATA/ICAO Special Provision A67. UL-recognized component.
Heavy duty compared to other AGM batteries – 20% more cycles 
Mount in any orientation.
Computer designed lead calcium tin alloy grid for high power density
AGM is ideal for back up and stored power applications
Convenient carry handles
Long service life float or cyclic applications
Maintenance-free operation
Thick plates within the battery to limit fluid expansion during freezing
Low self discharge
Copper terminals
Specifications:
Nominal Voltage 12V
Number of cell 6
Design life 10 years with proper maintenance
Nominal Capacity 77F(25C)
20 hour rate (10A 10.8V) 200Ah
10 hour rate (18.7A 10.8V) 187Ah
5 hour rate (35.8A 10.5V) 179Ah
1 hour rate (126A 9.6V) 126Ah
Internal Resistance
Fully Charged battery 77F(25C) 4mOhms
Self-Discharge
3% of capacity declined per month at 20C(average)
Operating Temperature Range
Discharge -20~60C
Charge -10~60C
Storage -20~60C
Max. Discharge Current 77F(25C) 1000A(5s)
Short Circuit Current 3300A
Charge Methods: Constant Voltage Charge 77F(25C)
Cycle use 14.4-14.7V
Maximum charging current 30A
Temperature compensation -30mV/oC
Standby use 13.6-13.8V
20.5" L x 8.78" H x 9.37" W
Weight(lb) 138
5 year warranty from manufacturer defects
What's Included With Your Off-Grid Solar Kit Order Again?
1 x 4,000 watt pure sine inverter charger 120 & 240 VAC
5 x 200 watt solar panels
1 x DC1600V32A2I0 – disconnect switch
1 x SCC60MPPT – 80 amp MPPT solar charge controller
4 x AGM12V200A – qty 4 – 200ah AGM deep cycle battery
1 x PVF100FT10AWG – 100 foot PV wire for solar panel to disconnect switch (female)
1 x PVM100FT10AWG – 100 foot PV wire for solar panel to disconnect switch (male)
1 x PVF20FT10AWG – male and female to bare ends for disconnect switch to charge controller
1 x PICGLFBATS – Battery temperature sensor
1 x CBL08FT6AWGC- 8 ft set of 6 AWG cable to connect charge controller to battery bank
1 x ANL80KITJ – 80 amp fuse kit for charge controller to battery bank
1 x CBL08FT4/0 – 8 ft set of 4/0 AWG cable set battery bank to inverter
3 x CBL02FT4/0 – 2 ft set of 4/0 cable (battery cables)
1 x ANL500KITWJUMP – 500 amp inline fuse kit with jumper for batteries to inverter
FREE Shipping
*Our kits include just about everything you need however you'll need your own installation tools and grounding rods. We highly recommend getting professional installation by a certified solar installer and/or master electrician. 
Still have questions? Don't hesitate to reach out or give us a call today