Description
Introducing our solar ready kit, the ultimate solution for a hassle-free setup of a self-sufficient battery-based power system. With this all-inclusive kit, you’ll have everything required to connect to your lithium iron phosphate battery bank, ensuring a reliable and long-lasting power source. Rest assured with a 10-Year Warranty on the battery bank, providing you with peace of mind.
Whether you already own solar panels or prefer to obtain them locally, our solar kits are designed to seamlessly integrate with almost any type of solar panel array. While the kit does not include solar panels, it can effortlessly accommodate up to 6kW of solar panels, allowing you to maximize your power generation potential.
What’s Included With Your Order?
- 48 x 410W Monocrystalline Solar Panels (19,200 Watts) – 12-Year Power Output Warranty
- 2 x SUNGOLD POWER 8kW HYBRID SOLAR INVERTER UL1741 STANDARD
- 2 x 48V ETHOS 15.4KWH Stackable Battery (10 Years Warranty)
- 1 x AC Battery Charger 48V for charging battery from grid or generator
- 4 x DC Disconnect Switch
- 6 x PV Inline Fuse Kit
- 6 x 8AWG Solar Extension Cables PV, approx. 10ft, SET
- 6 x 8AWG Solar Extension Cables PV, approx. 100ft, SET
- 4 x 4/0AWG Inverter Cable, approx. 3ft, SET
- 1 x 4/0AWG Parallel Cable, approx. 1ft, SET
- 2 x 1/0AWG SB175 Cable Anderson-Lugs, approx. 3ft, Assy
- 4 x 600Amps, 4 stud Busbar (Black)
Battery Bank Specs
Lithium Battery Bank |
ETHOS 15.4kWh |
System Voltage | 48V |
Nominal Voltage | 51.2V |
Chemistry | LiFePO4 |
kWh Capacity | 15.36kWh |
Ah Capacity | 300Ah |
Charging Voltage Range | 55.6 – 57V |
Max Charge Voltage | 57V |
Operating Voltage Range | 48 – 57V |
Suggested Low Voltage Cutoff | 48 – 50.8V |
BMS Cutoff Range | 42 – 47V |
Cell Configuration | 16S 3P |
Max Continuous Discharge Current | 200A |
Max Continuous Power | 10240W |
Max Discharge Peak Current | 300A (Max 5 seconds) |
Max Charge Current | 200A |
Charge Temperature Range | 32°F – 113°F (0°C – 45°C) |
Discharge Temperature Range | -4°F – 140°F (-20°C – 60°C) |
Optimal Discharge Temperature Range | 59°F – 95°F (15°C – 35°C) |
Storage Temperature Range (SoC >50%) | -4°F – 113°F (-20°C – 45°C) (Max 6 months) |
Weight | 387 lb (175.5 kg) |
Depth | 6.7 in (170 mm) |
Width | 26.5 in (674 mm) |
Height | 59.8 in (1520 mm) |
Max Connections | Up to (16) parallel connections per control box |
Protection Rating | IP65 |
Communications | CANBus / RS485 |
Certifications | UL9540, UL9540a, UL1973, UN38.3, & CE |
Warranty & Guarantee:
- Made in the USA
- 10-Year Warranty!
SUNGOLD POWER INVERTER/CHARGER HIGHLIGHTS:
-
All-in-one design: This product is compliant with UL1741 standards and integrates an 8kW split-phase off-grid pure sine wave inverter, an 80A AC charger, MPPT solar charge controllers, and a transfer switch into a single package.
-
Low-frequency inverter: The built-in pure copper low-frequency transformer makes this product more dependable and robust. The transformer can handle higher power spikes with longer durations when driving inductive loads such as electric motors, pumps, compressors, and air conditioners.
-
Built-in MPPT solar controller: This product has two 60A MPPT solar chargers that can accept up to two strings of 60A PV input (maximum 3500W) from two solar arrays or can be parallel-connected to accept 120A (maximum 2×3500W) input from a large PV array.
-
Battery compatibility: This unit is compatible with flooded lead-acid, sealed GEL/AGM/LiFePO4 batteries and can be charged by mains voltage or a generator, or power the load.
-
LCD Setting Panel: The product can be configured through the LCD setting for DC priority, AC priority, intelligent mode selection setting, AC charging current, AC charging voltage, and battery low voltage shutdown point setting.
Reviews
There are no reviews yet.