Description
- [More Efficiency] – Boost your solar panel efficiency by up to 25% with our tilting system that allows you to angle your panels towards the sun for optimal energy production.
- [Versatile Application] – Our solar panel mounting kit is perfect for a wide range of off-grid systems, including RVs, boats, motorhomes, sheds, and more. (avoid the shade to receive more sunlight)
- [Improve Adaptability ] – The newly upgraded ECO bracket can accommodate solar panel arrays ranging from 100W to 400W or panels with a width of approximately 45 inches.This bracket is suitable for all ECO-WORTHY solar panels.
- [Easier Assembly] -Are you still worried about not knowing which screw matches which bracket? ECO’s newly upgraded 45 bracket has already pre installed the main part of the bracket. After receiving the bracket, you only need to assemble it according to the instructions!
- [Simpler Operation]-The newly upgraded 45 bracket is marked with an adjustment scale, which allows you to adjust the angle of the bracket more conveniently during use.
- [ Package Includes ] – Four (4) 1143mm/44.7in Aluminum Mounting Rails*2, Two (2) 570mm/22.3in Aluminum Tilt Bracket*2, Four (4) M8 Plum Blossom Bolts*2, Eight (8) M8 Hexagonal Cylindrical Head Bolts*2, Four (4) M8 Wing Nuts*2, Eight (8) M8 Flange nuts*2,Four (4) M8 Flat Washers*2, Four (4) M8 Elastic Washers*2, Six (6) Self-Drilling Cap Screws*2.
James Houghton –
It’s taken me a while to get these assembled and put to work. I have a couple of out buildings on my property and all but one is powered by solar. I recently built an observatory and needed to mount some solar panels. One is pole mounted on a custom mount I made out of angle iron, u bolts and other hardware. It does work and cost me quite a bit less, but the Eco-Worthy brackets were much simpler to assemble, and the additional panel is portable on the Eco-Worthy hardware is portable and can be moved or stored away.
Assembly was easy enough. I mounted 1 200 watt panel on the bracket right under my pole mount panel. And to keep it secured to the ground I use cinder blocks and sandbags. They are good quality mounts that work well as portable mounts or more permanent mounts. They are sturdy, lightweight, and easy to assemble. And best of all, they do the job they are intended to do very well.
remote camper –
I’ve been using these stands for the past couple of weeks to hold two 100W/12V solar panels. They’ve been working great. They seem very sturdy — even in the wind (but I do weigh down the legs with some concrete block). And they are easy to setup and adjust.
remote camper –
I’m going to cut right to the chase here. I’ve put off doing this for years for portable, opting instead to use collapsible stools. For all the research one might to to come up with something a little less expensive, I doubt there will be much better.
What I like most: Everything needed is in the kit; stainless hardware.; angles adjustable without tools; roof attachment bolts.
Negative- Price? But for this price, there are TWO full bracket sets in the box. Don’t see a negative with that! A little more research revealed it was hard to find anything better.
At the heft of the box I thought they were steel. In fact, they are aluminum. The bottom L bracket and the slotted panel support L bracket come pre-assembled at the hinge point where the angle markings are located. This makes breakdown and reassembly easier for portable use.
Placing the panels face down on a blanket, mating the brackets to the panels went quickly. Eight 6mm Allen cap screws and serrated flange nuts are supplied to attach the panels to the bracket.
I intend to use these for a portable setup for a while and might install them later with the included self tapping screws for roof installation. These should accommodate just about any panel.
The photo shows two Renogy 100 watt panels on each set. Noteworthy is that although all 4 are 100 watt panels, the mounting holes in the frames are not spaced identically. They were bought in pairs at separate times. I grabbed 2 panels at random and just assumed it wouldn’t make a difference, but it did.
Looks like these will even accommodate two 135 watt panels each. Am going to order 3 more sets.
aTypicalEngineer808 –
Summary: This review is for several different solar panel brackets, some were purchases, and some were Vine reviews. While you could presumably head over to the BIG BOX stores and buy some generic components, the kits include everything you need to mount a single (or two) solar panel(s). Once assembled, the angle of the panel can be adjusted without tools. For RV applications, this is especially convenient since the panel would be flat for transport, and then angled once setup at a temporary location.
Observations: One other specific feature of these brackets are the top holes, which are slotted (vs. round), which allows for installation for different hole spacings, which vary my manufacturer. There are bracket kits available in three lengths, 22, 28 and 45 inches (these are the common size offerings).
Recommendations: Look for kits with stainless steel hardware, as the non-stainless will eventually corrode. I found that most of the brackets have sharp edges, so spending a few minutes with a hand file to remove the sharp edges will prevent cuts on your hands in the future (for me, that is time/effort well spent).
Pros: Good fit & finish; complete hardware kit.
Cons: Cost (as compared to buying generic components, and building the kit yourself); newer offering with very few reviews (as compared to the BogueRV kit below).
Conclusion: Overall rating these 4-stars (cost vs. convenience). Eco-Worthy offers two 45-inch kits, this one with two sets for $100, and a single set for $60.
Related Products:
ECO-WORTHY 2 Sets 45inch Adjustable Solar Panel Tilt Mount Brackets
Visit the ECO-WORTHY Store
$99.50
https://www.amazon.com/dp/B0CP3QVV6B
ECO-WORTHY Upgraded 45in Solar Panel Mount Brackets.
Visit the ECO-WORTHY Store
4.3 out of 5 stars 541 ratings
$59.99
https://www.amazon.com/dp/B0CP5SQ7VB
HQST Adjustable Solar Panel Tilt Mount Brackets, 28 inch ~ $50
Visit the HQST HIGH QUALITY SOLAR TECHNOLOGY Store
4.2 out of 5 stars 143 ratings
https://www.amazon.com/gp/product/B086JNWRVT
CMYYANGLIN Solar Panel Mounting Brackets Tilt Mount, Adjustable 45 inch ~ $58
4.6 out of 5 stars 19 ratings
https://www.amazon.com/dp/B094CN3199
LBG Products 28″ Adjustable Solar Panel Tilt Mount Mounting Brackets ~ $40
4.2 out of 5 stars 62 ratings
https://www.amazon.com/dp/B07PM5FSXL
Aulock Adjustable Solar Panel Tilt Mount Brackets- 28″ ~ $35
4.3 out of 5 stars 26 ratings
https://www.amazon.com/dp/B0956YS45Q
Chad –
Light weight but rigid quality, finish quality hardware
TroyN. –
Bought many for my solar projects. Look no further these are what you want.
Amazon Customer –
This product is very easy to assemble. It is sturdy and is priced very fair for what I received. I mounted two 400 watt panels. Works great. It was also less expensive than buying parts and assembling them to achieve the same result as I got with these mounts. The packaging was GREAT-double boxed. I would buy again. Rich