Description
- ECI Power: A brand for everyone with the goal of providing an open avenue for all to know that safe lithium power should not be cost-prohibitive nor outside the scope of your project.
- This Off-Grid Solar System Kit includes one 12V 20Ah LiFePO4 Battery, one 100W Monocrystalline Solar Panel and one 10A PWM Solar Charge Controller, one pair 10ft 12AWG MC4 Solar Cables, one pair 6ft 12AWG Battery Cables and one set Solar Panel Mounting Brackets.
- Economical: At a phenomenal price point, the battery is rigorously lab-tested and guaranteed to meet a minimum 2000 cycles at 80% DOD, providing high-performance longevity with a maximum of 5000 cycles at 50% DOD.
- System Detect: The 10A PWM controller automatically recognizes 12V and 24V systems for quick setup and programmed to maximize LiFePO4 Battery’s life through a meticulous CC-CV charging algorithm.
- Smart Tech: The controller automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit. Digital Display: The unit offers an ease-of-access screen interface, displaying data ranging from state of charge to battery health.
Ryan and Whitney –
It works great was easy to install
Aarão –
Comes with what you need for the most part, although in order to make safe and secure connections between the cables and controller, you will need a crimping tool and heat shrink, which are not included in this kit.
The kit came in two separate shipments, the panel in one box, and the other hardware in another.
I have the panel mounted onto a wood frame for ease of moving around, and because I already had spare wood. I will build a slot in the frame to hold the battery as well so that way it will be easier to hold/carry it all without the risk of the battery weight tugging on the connections. I am sure that there are better setups out there, but as this is my first time doing this, it is obvious that not everything will be as optimized as it could be.
The charging controller in this kit is rather basic, everyone one youtube recommends a better controller for any larger setup, but as this is a small setup kit I am sure that it will continue to serve just fine.
Ryan and Whitney –
Very well made parts. The Solar Controller is top quality and the wiring is heavy-duty and has great connections. Easily installed and just works.
Aarão –
I have a pipe line through the middle of my yard and cannot get power about putting another service so this gives me lights and chargers for my equipment
Michael –
Easy to install. Works well. Hooked to a small inverter to power lighting.
wade clement –
Installed in / on a garden shed. Added 4 lights and it works great. Easy to install.
Michael –
Runs my little irrigation pump with no problems.
Wyldfyre –
This kit is wonderful for the most part.
The panels (100×2) have been able to generate a max of 221w in January. The battery is small but serves its purpose as a buffer. I have recently added 2 more panels and set up in a 24v configuration using AGM batterys. The controller invertor will handle up to 480w so I have a 2000w invertor coming straight off the battery bank.
Biggest complaint is the solar app… it doesnt play well with new android and I often have to reset it. For a small solar project, this thing is great!!!
Picture provided is from first setup used to charge ryobi batteries while I power sanded all afternoon using a ryobi quick charger and a bestek 200w car invertor. Also pictured is the allwei 500w power station… I charge that thing up during the day and use it to power work laptop and cell phones etc all day long.